Blog

A few tips on how to clean your water cooler

You might think that your water cooler is not getting dirty but it can get dirty from the inside and outside. During the house cleaning process your water cooler is the one that needs to be cleaned and sanitized regularly or occasionally. Make sure that you remember that microbes really loosen the moisture and you have got plenty of them in your water cooler. 

 

Here are some of the tips by House Cleaning Woodbridge which you can learn to effectively clean your water cooler both from the inside and the outside and then you can read about the details of how you can really sanitize your water cooler from the inside as well during the house cleaning process. 

 

Note: When house cleaning just make sure that you go through all of the instructions that are given by the manufacturer before you actually start the cleaning process. Most of the water coolers are not having the same anatomy. You won’t want to damage your water cooler or break it. 

 

How to best clean water cooler? 

When you are planning to decide which one is the best way to properly clean and sanitize your water cooler then make sure that you wait for the jar to get empty completely. Your life is going to get so much easier if you are not going to lift that heavy water cooler bottles or don’t worry about spilling water all over your house or kitchen. 

 

Things Required:

- Jug

- 3 cup of hot water

- 1 cup of vinegar

- Dishwashing liquid

- Microfiber cloth 

- Bucket

- Gloves

 

You need to use the cold water tap in order to drain the cooler’s content into your jug or bucket that you are using, in this case the water is still drinkable. 

 

If required that you can remove the guard from your water cooler as the water guard is the inside part that is going to puncture the inside part of your cooler and not all of the coolers are having it during the house cleaning.

 

When house cleaning you need to remove the baffle and wash it by using the water and dishwashing liquid by using your hands. After that you should rinse the water guard and make sure that you get rid of all soap residue and then place it to get dry or use a microfiber cloth to dry it completely. 

 

Mix 3 cup of water and 1 cup of vinegar and then pour it inside your water cooler. Make sure that you are wearing your safety gloves. Use microfiber cloth to wipe the inside of the cooler. 

 

After that you need to drain the cleaning solution from the tap of your cooler into the bucket and then put the water guard back into the baffle. 

 

When house cleaning install a new bottle and plug the cooler back to the power supply during the house cleaning. 

 

If you need more help then you should contact your local House Cleaning Woodbridge experts. Call House Cleaning Woodbridge experts.